Frp p10 plus fasboot install#

It will automatically detect the Fastboot device and will take some time to install it.Next, click on the Scan&Download button to start flashing the stock firmware.Connect your device via a USB cable with the Fastboot or Download Mode. You will see the installation progress page.xml firmware file for your device and click on Open. Don’t put anything, just leave it blank and click on the Set button.Click on the Browse button (three-dot icon) and it will ask for the password.Next, you will see the XML firmware file upload option.Launch the QPBLFBML01.exe file to open the Huawei Multi-Download Tool.Now, Download and Install the Huawei Handset Product Line Driver and Huawei USB Driver your PC.

First of all, Download and extract the Huawei smartphone Multi Download Tool on your computer.

You’ll see ‘Installing system update’ > Wait for a while > Your device will automatically reboot after flashing.

Switch off your handset > Long-press Vol Up + Vol Down + Power key together for a few seconds until the fastboot mode appears.

Frp p10 plus fasboot zip file#

Extract the downloaded firmware zip file on PC > Copy the UPDATE.APP file into the dload folder on your MicroSD card.Create a new folder called dload on your MicroSD card.If the above methods, don’t work on your device, you can try the next two methods. When the installation is complete, you could safely remove the OTG.The system will now read files from the inserted SD card/USB storage or NM Card and will subsequently flash the file. After that, select the Memory Card Upgrade.From the menu that appears, select the Software Update option. Now head over to the dialer and enter *#*#2846579#*#*.Extract the dload stock firmware of the Huawei P10 Plus and transfer the three extracted files to the Huawei NM Card or to the memory stick.Let’s now have a look at how the same could be done via NM Card. So these were the steps to install the stock dload firmware on Huawei P10 Plus using the memory stick. In that menu, select Update Mode, then select the Memory card/OTG update mode.Doing so will make your device reboot to eRecovery mode. Press the Power button and as it vibrates and shows the Huawei+Android logo, presses the Power button three times.Make sure it has all the extracted files from the dload firmware. Now connect the memory stick using an OTG cable to your device.Factory reset your device from the Settings option (optional).Make sure it is formatted as exFat or NTFS. Download the dload firmware from the above link, extract it and copy the same to your USB memory stick.Upgrade using OTG Adapter or OTG Cable+USB Memory

You will also require to Download Huawei Handset Product Line Driver and install it.

Download Huawei Multi-Download Tool on your PC and install it.

Alternatively, if you have TWRP Recovery installed on your device, you can create Nandroid Backup through TWRP Recovery.

Make sure to take a backup of your device data.

We recommend having at least a 50% charge on your device before installing the firmware.

The stock firmware provided here is for Huawei P10 Plus (VKY-AL00).

Frp p10 plus fasboot drivers#

Now, before we get straight to the installation guide, make sure to follow the prerequisites section below and make sure you download the flash tools and drivers on your PC. Steps to Flash Firmware File on Huawei P10 Plus VKY-AL00

Restore Huawei P10 Plus back to Factory State.

Fix Unfortunately, the app has stopped errors on Huawei P10 Plus.

You can fix the boot loop issue on Huawei P10 Plus.

Remove any malware or Adwares from Huawei P10 Plus.

You can fix or repair the IMEI on your device using DB files from Stock ROM.

If your device is dead, you can unbrick using the Stock ROM file.